Bheri RMC logo
BheriRMC

Custom Mix · On-Site Delivery

HomeServicesFloors & Slabs

Service Detail

Floors & Slabs

A perfectly flat floor starts with the right mix and a skilled pour crew. We supply self-leveling, self-compacting concrete blended for each floor type: ground-bearing slabs, suspended floors, or industrial hardstands. Our team handles power floating and finishing to your specified tolerance.

Quick Specifications

Strength Range2,500 – 5,000 PSI
Flow ClassF3–F6 (self-leveling)
Aggregate Size10mm max (slab) / 20mm (hardstand)
ReinforcementSteel mesh, polypropylene fiber, or steel fiber
Minimum Thickness100mm residential / 150mm commercial
Curing MethodCuring compound or wet hessian

Key Features of Our Floors & Slabs

Self-Leveling Technology

Flow-able mixes that spread to a flat, consistent surface with minimal screeding effort, achieving tolerances under 3mm/3m.

Fiber Reinforcement

Polypropylene or steel fibers replace traditional mesh in many slab applications, reducing labor and controlling plastic shrinkage cracking.

Surface Hardeners

Dry-shake and liquid hardeners applied during finishing for industrial floors requiring superior abrasion resistance.

Underfloor Heating Compatible

Low-shrinkage, high-flow mixes engineered to encapsulate underfloor heating pipes without voids or segregation.

Joint Planning

Our team advises on saw-cut and formed joint layouts to control cracking and meet structural requirements.

Multiple Finishes

Broom, trowel, exposed aggregate, or polished finishes available to suit your floor's final use.

Typical Applications

  • Residential ground floor slabs
  • Suspended reinforced floors
  • Garage and workshop floors
  • Retail and commercial floors
  • Warehouse and factory hardstands
  • Wet room and bathroom screed beds
  • Rooftop podium slabs

Mix Specifications

Strength Range2,500 – 5,000 PSI
Flow ClassF3–F6 (self-leveling)
Aggregate Size10mm max (slab) / 20mm (hardstand)
ReinforcementSteel mesh, polypropylene fiber, or steel fiber
Minimum Thickness100mm residential / 150mm commercial
Curing MethodCuring compound or wet hessian

Frequently Asked Questions

How long before I can walk on the slab?
Foot traffic is generally safe at 24–48 hours depending on the mix and ambient temperature. Light vehicle traffic can resume at 7 days; full load at 28 days.
Do you need to install the rebar?
We focus on concrete supply and pour. Rebar and mesh installation is typically done by the site team. We can, however, supply fiber-reinforced concrete that reduces or eliminates mesh requirements.
Can you pour a slab in sections?
Absolutely. We plan slab sections with you in advance and pour each bay within agreed construction joint locations to control cracking.
What flatness tolerances can you achieve?
Our standard residential slabs achieve F25 (flatness). Industrial slabs can be poured and laser-screeded to FM2 (superflat) if required.

Ready to Start Your Floors & Slabs Project?

Get a free, itemized quote from our team within 24 hours. No obligation, no pressure.