Bheri RMC logo
BheriRMC

Custom Mix · On-Site Delivery

HomeServicesWalls & Structures

Service Detail

Walls & Structures

Our structural concrete mixes are engineered to meet exact load requirements for walls and cores in both residential and commercial builds. Every batch is tested for compressive strength before leaving our facility, and our team stays on-site from first pour to final finish.

Quick Specifications

Strength Range3,000 – 6,000+ PSI
Slump3–6 inches (adjustable)
Aggregate Size10mm / 20mm
Cement TypeOPC 43 / OPC 53
AdmixturesPlasticizer, accelerator, retarder available
Delivery TimeSame-day for confirmed orders

Key Features of Our Walls & Structures

Custom Strength Grades

Mixes ranging from 3,000 PSI standard to 6,000+ PSI high-performance for structural cores and shear walls.

Reinforced Formulations

Steel fiber and polypropylene fiber options available to control cracking and improve tensile performance.

Pumpable Mixes

High-workability mixes designed for pump placement in tight wall forms without segregation.

Rapid Strength Gain

Accelerated mixes available for fast formwork stripping, reducing project timelines by up to 40%.

On-Site Mixing

Volumetric trucks mix fresh at the point of delivery. No slump loss, no rejected loads.

Quality Documentation

Every pour comes with a batch ticket, mix design sheet, and compressive strength test results.

Typical Applications

  • Load-bearing and shear walls
  • Partition walls and dividers
  • Structural cores and lift shafts
  • Tilt-up wall panels
  • Basement and underground walls
  • Multi-story residential buildings
  • Commercial and industrial structures

Mix Specifications

Strength Range3,000 – 6,000+ PSI
Slump3–6 inches (adjustable)
Aggregate Size10mm / 20mm
Cement TypeOPC 43 / OPC 53
AdmixturesPlasticizer, accelerator, retarder available
Delivery TimeSame-day for confirmed orders

Frequently Asked Questions

What PSI do I need for a load-bearing wall?
Most load-bearing walls require a minimum of 3,000 PSI. For multi-story structures or shear walls, we recommend 4,000–5,000 PSI. Our engineers will review your structural drawings and advise.
Can you pour walls in cold weather?
Yes. We offer heated water and accelerator admixtures for cold-weather pours, and can advise on curing blankets to protect fresh concrete.
How far in advance do I need to book?
We recommend 48 hours for standard orders. For large structural pours, 5–7 days allows us to prepare the correct mix design and coordinate trucks.
Do you provide formwork?
We focus on concrete supply and placement. However, we can refer trusted formwork partners and advise on form design for optimal concrete placement.

Ready to Start Your Walls & Structures Project?

Get a free, itemized quote from our team within 24 hours. No obligation, no pressure.